MVP-F

Description

The MVP-F is a closed-loop proportional valve controller housed in an 18mm DIN connector body. The controller provides current to a valve solenoid in response to an input signal while monitoring a feedback signal. The controller employs a PID control algorithm. LED indicators on the module provide an overview of the operating status. System configuration is accomplished through a clip-on infrared adapter, without removing or opening the connector body. All settings are stored in permanent memory within the unit. The unit is prewired and permanently sealed.

Features

• Easily configured using WhiteOak SAM software or our Hand Held Interface
• LED indication of Status and Output Current
• Permanently sealed, standard DIN 43650 Form A connector body
• Selectable dither frequency up to 1000 Hz
• Adjustable current limited output with short circuit protection
• All input and output limits are independently adjustable
• Fully adjustable PID control loop
• User configurable over and under limit handling
• Pre-wired, shielded TPE cable
• Microprocessor controlled for consistent, reliable performance

Operating Specifications

User's Manual

For detailed information about the MVP-F, download the User's Manual: 
D-MVPF-C.PDF

Part Numbers

The following part numbers are available in the MVP-F series:

• MVP-F1V-06A-10F - 0-10V input, 600mA max output, 10ft cord
• MVP-F2A-06A-10F - 0-20mA input, 600mA max output, 10ft cord
• MVP-F1V-12A-10F - 0-10V input, 1.2A max output, 10ft cord
• MVP-F2A-12A-10F - 0-20mA input, 1.2A max output, 10ft cord
• MVP-F1V-25A-10F - 0-10V input, 2.5A max output, 10ft cord
• MVP-F2A-25A-10F - 0-20mA input, 2.5A max output, 10ft cord

For custom cord lengths replace -10F with -xxF where xx = length in feet.

Ordering Information

List Price:
MVP-Fxx-xxA-10F - $269.00
MVP-Fxx-xxA-xxF - $275.00+0.75/ft

To order products,

Email: orders@whiteoakcontrols.com

Fax:877-469-9815
Find A Distributor or
Buy Online