MVP-R

Description

The MVP-R is a ramping valve controller housed in an 18mm DIN connector body.  The controller provides adjustable ramp times and current levels.  LED indicators on the module provide an overview of the operating status.  System configuration is accomplished through a clip-on infrared adapter, without removing or opening the connector body.  All settings are stored in permanent memory within the unit.  The unit is prewired and permanently sealed.

Features

• Easily configured using WhiteOak Terminal software or our hand held interface
• LED indication of Status and Output Current
• Standard, permanently sealed DIN 43650 Form A connector body
• Selectable dither frequency up to 300 Hz
• Adjustable current limited output with short circuit protection
• Output limits are independently adjustable
• Adjustable ramp up and ramp down times (RP1 has ramp up only)
• Pre-wired 18 AWG PVC cable
• Microprocessor controlled for consistent, reliable performance

Operating Specifications

User's Manual

For detailed information about the MVP-R, download the User's Manual: 
D-MVPR-A.PDF

Part Numbers

The following part numbers are available in the MVP-R series:

• MVP-RP1-06A-10F - Ramp Up Only, 600mA max output, 10ft cord
• MVP-RP1-12A-10F - Ramp Up Only, 1.2A max output, 10ft cord
• MVP-RP1-25A-10F - Ramp Up Only, 2.5A max output, 10ft cord
• MVP-RP2-06A-10F - Ramp Up/Down, 600mA max output, 10ft cord
• MVP-RP2-12A-10F - 0-10V input, 1.2A max output, 10ft cord
• MVP-RP2-25A-10F - 0-20mA input, 2.5A max output, 10ft cord

For custom cord lengths replace -10F with -xxF where xx = length in feet.

Ordering Information

List Price:
MVP-RP1-xxA-10F - $119.00
MVP-RP2-xxA-10F - $129.00

To order products,

Email:  orders@whiteoakcontrols.com

Fax:  877-469-9815